Adjustment Program Epson Px660 !!top!! May 2026

The Epson Adjustment Program for the Epson Stylus Photo PX660 (also known as the "AdjProg" or Service Utility) is a specialized diagnostic software used by service centers to maintain and repair Epson inkjet printers. For the average user, its primary value lies in resolving the "Service Required" error that occurs when the printer's internal waste ink pad counter reaches its limit. What is the Epson PX660 Adjustment Program?

Step-by-Step Guide

1. Enter Printer Service Mode

The Adjustment Program will only connect in Service Mode, not normal mode. adjustment program epson px660

: Allows you to program a new ID into the printer after replacing the print head. EEPROM Initialization The Epson Adjustment Program for the Epson Stylus

To reset your Epson PX660 using an adjustment program, you typically need to follow a series of steps to reset the Waste Ink Pad Counter. This error occurs when the printer's internal pads, which collect excess ink during cleaning, are theoretically full. Steps to Use the Epson Adjustment Program Connect the Printer: Ensure your Epson PX660 Put a checkmark inside the box next to

Ink Pad Hardware: Resetting the software does not physically clean the pads. If you reset the counter multiple times without replacing or cleaning the pads, ink could eventually leak and damage your printer.

Beyond resetting ink pads, the program can perform several technical adjustments: MnogoChernil

The Elephant in the Room: Physical Pads

If you reset the counter three or four times without changing the pads, you will wake up to a puddle of black ink on your desk.

Step 5: Reset the Counters

  1. Put a checkmark inside the box next to “Main pad counter” and “Platen pad counter”.
  2. Click the “Initialization” or “Reset” button.
  3. A warning box will appear: “Are you sure you want to initialize the waste ink pad counter?”
  4. Click “Yes” or “OK”.
  5. Wait 10-15 seconds. You will see a pop-up: “Initialization complete.”