Amada Digipro Manual |work| · Popular

The Amada DigiPro is a specialized digital infrared protractor designed to enhance the precision of sheet metal bending on Amada press brakes. By serving as a bridge between the physical part and the machine's computer numerical control (CNC), it significantly reduces the need for trial-and-error bending. Overview of the DigiPro System

The DigiPro is a high-precision angle measuring tool that transmits data wirelessly to your machine's control system. Instead of manually adjusting your press brake after a test bend, the DigiPro sends the exact measured angle to the controller, which then automatically corrects the bend for the next part. Key Specifications Measurement Range: 0–360 degrees. Accuracy: ±0.1 degree. Transmission: Wireless/Infrared to the AMNC control unit. Display: Clear digital LCD for instant feedback. How to Use the DigiPro (Quick Start) amada digipro manual

Uses digital infrared technology to transmit measurement data. 2. Core Functions Precision Angle Measurement: Verifies the angles of bent parts with high accuracy. Automatic Correction: The Amada DigiPro is a specialized digital infrared

For detailed technical support or a full physical copy of a specific manual, you can contact Amada European Support or refer to the official Amada America Support troubleshooting codes for a particular Amada press brake model? Amada Digipro CD2000 Manual | PDF - Scribd Setting the Reference Point (Home Position): Loosening the

Automatic Correction (Semi-Automatic Mode): If a measured angle deviates from the target, the DigiPro transmits the data, and the machine automatically recalculates the penetration depth to correct the bend. Operational & Safety Steps

Automatic Correction (Semi-Automatic Mode): This is perhaps the most vital function. The DigiPro transmits the measured angle to the NC, which then automatically corrects the machine's program to compensate for springback or material variations. Setup and Calibration Requirements

With the manual propped open on a nearby workbench, Elias slid a piece of 10-gauge aluminum into the press brake. He performed a test bend. He placed the DigiPro’s legs against the flange. Beep.

  • Setting the Reference Point (Home Position): Loosening the coupling and aligning the mechanical stop with the controller’s digital zero.
  • Encoder Offset: How to adjust the parameter (usually P-01 or P-02 in hidden service mode) to correct for mechanical backlash.