Bonavita Hudson Ii Lifestyle Crib Instructions -

Bonavita Hudson II Lifestyle Crib Instructions: A Comprehensive Guide

Final Safety Check: Go back and tighten every bolt. Ensure there are no gaps wider than 2 3/8 inches (6 cm) between the slats. 🛌 Conversion to Toddler Bed bonavita hudson ii lifestyle crib instructions

Step 3: Install the Mattress Support

1. Locate the casters and the corresponding screws.
2. Attach the casters to the bottom of the crib using the provided screws.
3. Make sure the casters are securely attached and the crib is stable.

• Identify the metal mattress spring frame.
• There are usually 4 brackets on the corners.
• Align the holes in the brackets with the holes on the inside of the crib posts.
• Crucial: Ensure the "L" brackets are facing inward so the mattress can sit flat.
• Secure with bolts. Do not overtighten yet; snug is better until the whole frame is square.

• Lay out all parts (Left/Right side panels, front rail, back panel, mattress support board, hardware kit).
• Verify against the manual’s part list to avoid missing screws.

Assembly generally requires an Allen wrench (usually included) and a Phillips head screwdriver. Locate the casters and the corresponding screws

Part 4: 4-in-1 Conversion Instructions

You will keep the Headboard and Footboard for life. You will discard (or repurpose) the side rails. Identify the metal mattress spring frame

• Highest: Newborn (easiest to reach baby).
• Middle: Baby can sit unassisted (~6 months).
• Lowest: Baby can pull to stand (~12+ months).