Centurion Cs 2000 Power Converter Manual Wiring Diagram 'link'

The wiring for the CS 2000 typically involves five primary connections across the AC input and DC output sides. AC Input (Shore Power/Generator): Black Wire: Connects to the AC "hot" source (shore power or generator). White Wire: Connects to the AC neutral source. Green Wire: Connects to the metal ground point on the RV. DC Output (Battery/12V Systems):

• AC Input Section: Connects to external Shore Power (120V AC).
• DC Output Section: Connects to the RV’s 12V fuse block and the auxiliary battery.
• Converter Section: Internal electronics that step down voltage and convert AC to DC.

The detailed wiring for your specific RV (wire colors from converter to fuse panel) were created by Fleetwood, Holiday Rambler, or Winnebago—not Centurion. centurion cs 2000 power converter manual wiring diagram

Input Stage: [Shore Power Source] --> [Main Breaker] --> [Centurion AC Input Block] (Note: The AC ground and DC negative must be separated; the DC negative is bonded to the chassis ground separately from the AC ground per RV safety standards.) The wiring for the CS 2000 typically involves

functions strictly as a basic "trickle" charger. It is widely recommended in RV communities to bypass this module and use a dedicated smart charger if you are running modern deep-cycle or lithium batteries. 🔌 Standard Wiring & Terminal Configuration AC Input Section: Connects to external Shore Power

Section C: The Internal Wiring Diagram (Simplified)

Imagine looking from above:

• Sense: Connect to battery positive terminal (for voltage sensing)
• Charge: Connect to battery charger control circuit (if applicable)