Ddcs V3 1 Firmware Update May 2026

Enhanced Stability: Reduces unexpected freezes during long G-code runs.

Step 4 – Restore Settings

After reboot, re-enter your motor tuning, homing, and soft limit parameters manually (do not restore from an old backup file unless it is from the same firmware version). ddcs v3 1 firmware update

Improved Logic: Better handling of tool changes (ATC) and probing routines. Larger file support – The firmware now reliably

🚀 What’s New in This Firmware Version?

1. Enhanced USB & File Management

• Larger file support – The firmware now reliably handles G-code files up to 8GB (previously 2GB).
• Faster directory loading – Folders with over 500 files load up to 3x faster.
• Improved FAT32 compatibility – Reduced instances of “USB Not Ready” errors on boot.

• Fixed: Occasional stuttering during long G-code file execution.
• Fixed: Issues with the "Feed Hold" function sometimes failing to resume correctly.
• Fixed: Display errors on the Z-axis depth readout when using specific soft limit configurations.
• Fixed: Compatibility issues with certain Chinese-origin stepper drivers that utilize dynamic current control.

Format a USB drive (typically 4GB or smaller is recommended for compatibility) to FAT32. re-enter your motor tuning