Echo T3 Cycle — Computer Manual Free !exclusive!

The Echo T3 cycle computer is an older model typically manufactured by brands like Echowell. While direct PDF downloads for the specific "T3" can be rare, you can find digital versions and setup guides on sites like Manua.ls or Sheldon Brown. Core Setup Instructions

Method 3: YouTube Video Descriptions

Many cyclists post programming guides for the Echo T3. Search YouTube for: echo t3 cycle computer manual free

  • 700x23c road bike: 2096
  • 700x35c hybrid: 2180
  • 26x1.95 mountain bike: 2050
  • 27.5" (650B): 2100

For a direct note or query:

  • Regularly clean the device: use a soft cloth and mild soap
  • Update software regularly: check for updates on our website
  • Troubleshooting: refer to our website for common issues and solutions

Kilometers or Miles: After wheel setup, choose between km/h or m/h using the Right button and confirm with the Left button. Set the Clock: Navigate to the Clock mode. Hold the Left button for 3 seconds until the hour blinks. The Echo T3 cycle computer is an older

(or AC) button on the back or a combination of front buttons until the numbers flash. Input Circumference 700x23c road bike: 2096 700x35c hybrid: 2180 26x1

Wheel Circumference (c): When the battery is first inserted, a four-digit number (e.g., 2136 for 700x28mm tires) will flash. Use the Right/MODE button to change the digit and the Left/SET button to move to the next digit.

Setting the Clock

  1. Press MODE to enter CLK display.
  2. Hold SET until the hour flashes.
  3. Use START/STOP to adjust.
  4. Press SET to move to minutes; repeat.
  5. Press SET to exit.