1390 Resetter: Epson

The Epson Stylus Photo 1390 resetter, also known as the Epson Adjustment Program, is a specialized maintenance utility designed to resolve the "Service Required" error that occurs when a printer's waste ink pad counter reaches its limit. This error is typically signaled by alternating flashing red lights on the printer's control panel, which prevents further printing until the counter is reset. Understanding the "Service Required" Error

While a software reset fixes the digital lockout, it doesn't physically clean the ink pads. Experts recommend that if you reset your counter more than once, you should consider replacing or cleaning the physical pads or installing an external waste ink bottle to avoid actual leaks. How to Reset Your Epson 1390 The process generally follows these steps: Download a compatible resetter tool for the 1390 model. epson 1390 resetter

Epson printers are workhorses, but they are notoriously frustrating when the " Ink Pad is at the end of its service life" error appears. If you own an Epson Stylus Photo 1390 (or the 1400/1410 variants), you have likely encountered this roadblock. The Epson Stylus Photo 1390 resetter , also

Phase 2: Downloading the Tool

Search for "Epson 1390 Adjustment Program" or "Epson 1390 Resetter". You will typically find these as .zip or .rar archives. Install an external waste ink tank (see section below)

If your printer doesn't recognize a refilled cartridge, use a physical Chip Resetter AliExpress Remove the Cartridge

How to Reset Epson 1390 Waste Ink Counter (Step-by-Step)

Before You Begin:

• Install an external waste ink tank (see section below).
• Connect the printer via USB (not network/WiFi).
• Disable your antivirus temporarily (some reset tools are flagged as false positives).
• Ensure printer is turned ON with the error message displayed.

What is an Epson 1390 Resetter?

Sustainability: It keeps perfectly functional hardware out of landfills. The Epson 1390 is built to last; a simple software lock shouldn't be its end.

Steps:

1. Download the Epson 1390 Adjustment Program (e.g., AdjProg.exe).
2. Extract the ZIP file (password may be provided in the forum thread).
3. Run the program as Administrator (right-click → Run as Administrator).
4. Select your printer model: Epson Stylus Photo 1390 Series.
5. Click "Particular adjustment mode" (or "Specific adjustment").
6. From the list, choose "Waste ink pad counter" (or "Initial ink charge" sometimes).
7. Click "Check" to read current counter values.
8. Check the boxes for "Main pad counter" and "Platen pad counter" (usually both).
9. Click "Initialization" or "Reset".
10. Turn the printer off, wait 10 seconds, turn back on.