Monotron 124 Manual ((full)) | Flash

The Flash Monotron 124 is a digital time switch and defrost timer primarily used for controlling electrical circuits in commercial refrigeration and industrial panel applications. It is manufactured by Flash (part of the Hager Group) and features a DIN rail mount design. Technical Specifications Power Supply: 230V AC. Switching Capacity: 16A at 250V AC. Configuration: 1-channel with a single relay.

Memory: Up to 20 switching actions (ON/OFF) per 24-hour cycle. flash monotron 124 manual

It is a single-module DIN rail mounted device, making it easy to swap into existing electrical panels. How to Navigate the Manual If you are holding the Monotron 124 manual The Flash Monotron 124 is a digital time

5. Setup Procedure

1. Positioning: Place the Monotron 124 on a stable, grounded bench. Ensure 15 cm clearance on all sides for airflow.
2. Grounding: Connect unit to a dedicated earth ground (not just neutral). A floating ground will cause erratic welding and RF burns.
3. Air Supply: Attach clean, dry compressed air at 5–6 bar (70–85 psi) to the rear pneumatic inlet.
4. Tooling: Mount the upper brass sealing die to the platen. Set lower counter-electrode (aluminum or Teflon-coated).
5. Warm-up: Switch on main power. Allow tube heater for 3 minutes before first weld.