Free Resetter Canon Service: Tool V3200.32 |work|

Canon Service Tool V3200 is an older utility designed for technicians to perform low-level maintenance on Canon Pixma printers, such as clearing "ink absorber full" errors (e.g., Error 5B00). Review Summary

• Ink Cartridge Reset: Resets the ink cartridge counter, allowing you to use refilled or remanufactured cartridges.
• Error Code Clearing: Clears error codes and messages, such as "ink absorber full" or "paper jam."
• Printer Settings Adjustment: Adjusts printer settings, such as paper size and print quality.
• EEPROM Reset: Resets the printer's EEPROM (electrically erasable programmable read-only memory) to its default settings.

• Use a Canon-authorized service provider – Some independent shops perform waste pad resets for a modest fee.
• Install a maintenance kit – Several third-party companies sell replacement ink pads plus a licensed reset key for specific Canon models.
• Third-party software (legal versions) – Some utilities like WICReset (for certain models) offer paid, legitimate reset functions without requiring cracked service tools.
• Manual EEPROM reset – For advanced users, some Canon printers support counter reset via specific button sequences entered during power-on, though this varies widely by model.

Have you successfully used V3200.32? Share your experience in the comments below—but please, no direct download links. Free Resetter Canon Service Tool V3200.32

Step-by-Step: How to Use Canon Service Tool V3200.32 (Legit Copy)

Assuming you have obtained a clean, paid version of V3200.32, here is the standard workflow. Canon Service Tool V3200 is an older utility

Step 3: Reset the Waste Ink Counter

1. Click the "USB PORT" button. The tool will detect your printer (e.g., "USB001").
2. Check the "CLEANING" and "PAPER FEED" checkboxes (these force full reset mode).
3. In the drop-down menu labeled "Set" (or "Choose Destination"), select your printer model.
4. Click the "MAIN" button next to "Waste Ink Counter." Do NOT click "EEPROM CLEAR" or "INK COUNT" unless you are an expert.
5. A progress bar will appear. Wait 5–10 seconds.
6. The tool will display "Set Successful..." or "Waste ink counter reset OK."
7. Turn off the printer, wait 30 seconds, and turn it back on. The error should be gone.

. If the printer is not in this mode, the software will not detect it (often resulting in Error 006). Step 1: Enter Service Mode Ink Cartridge Reset : Resets the ink cartridge

The V3200 version is specifically noted for its ability to interact with older and some modern Pixma models to perform the following: