The Huawei HG8145X6 is a high-end Optical Network Terminal (ONT) designed for Fiber-to-the-Home (FTTH) deployments. It is part of Huawei’s "OptiXstar" series, often branded as the "Home Gateway Unit" (HGU). The device is notable for combining a GPON ONT, a Wi-Fi 6 (802.11ax) router, and a voice gateway into a single compact unit.
Open a web browser and enter the default IP address: http://192.168.1.1 or http://192.168.100.1. Huawei Hg8145x6 Firmware
| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | "Firmware incompatible" | Wrong region or hardware revision (e.g., HG8145X6 vs HG8145V5). | Double-check your device label. Never cross-flash. | | Upgrade hangs at 100% | Corrupted download or browser cache. | Hard reset (press reset 30 sec), clear browser cache, retry with Firefox/Edge. | | Lost admin password after update | Firmware resets to defaults. | Use the back sticker password. If changed, request ISP reset token. | | ONT stuck in boot loop | Bricked due to power loss during upgrade. | Contact ISP for a replacement. JTAG recovery is extremely difficult. | | Wi-Fi 6 speed drop after update | New regulatory region settings. | Manually set 5GHz channel width to 160MHz and disable "Energy Efficient Ethernet." | Technical Deep Dive: Huawei HG8145X6 Firmware 1
Contact Your ISP: This is the most reliable way to get the correct firmware version tailored to your specific service. Security
A password will be e-mailed to you