Id6100 Danieli Manual Hot !new!

The Go to product viewer dialog for this item. is an industrial infrared hot metal detector (HMD) and loop scanner produced by Danieli Automation. It is a critical sensor used in steel rolling mills to detect the presence and position of glowing metal bars at temperatures typically exceeding 700°C (1300°F). Key Specifications & Function

Analog: Provides a signal proportional to the material's position or the width/offset of a hot strip. 2. Technical Specifications Category Heat Detector / Loop Scanner Operating Voltage 20–30 VDC Detection Range 830–1000 mm Protection Rating IP66 (dust-tight and protected against heavy seas/jets) Housing Rugged aluminum case for harsh environments Weight Approximately 4.00 lbs 3. Key Operational Features id6100 danieli manual hot

Rating

Weighs approximately 4.00 lbs and features a rugged aluminum case with an IP66 protection rating. Core Functions & Usage Loop Scanning: The Go to product viewer dialog for this item

Power Requirements: It typically operates on 20–30V DC power. Procurement and Availability Switch S1 (x10): Sets the tens digit of

Detection Principle: Uses a line CCD camera and a high-quality lens with an infrared filter to focus heat emissions onto a linear-array sensor.

• Switch S1 (x10): Sets the tens digit of the Profibus address.
• Switch S2 (x1): Sets the units digit.
• Warning: Changes only take effect after a power cycle.

Danieli Automation ID6100 is an industrial infrared loop scanner and hot metal detector (HMD) primarily used in hot rolling mills to detect the position and presence of hot steel products. Technical Summary The device belongs to the ID6000 series