Manual New ((full)) — Kes Geyser Load Control Timer

KES Geyser Load Control Timer Manual: A Comprehensive Review

from 00:00 to 03:00, 08:00 to 15:00, and 20:00 to 24:00, as well as during peak hours. Manual Override kes geyser load control timer manual new

1. Press the P (or Program) button. The screen will usually display 1 ON.
2. Press the Week button to select the days (e.g., Mo-Fr, Sa-Su, or specific days).
3. Use the Hour and Min buttons to set the time you want the geyser to switch ON.
4. Press P again. The screen will display 1 OFF.
5. Repeat the steps above to set the time you want the geyser to switch OFF.
6. Note: You can set multiple On/Off periods (usually up to 8 or 16 settings) by pressing P repeatedly to access slots 2, 3, etc.

This guide covers the standard setup, programming, and troubleshooting for KES Geyser Load Control Timers. Most models (such as the popular KES-90B or digital variants) follow similar logic. KES Geyser Load Control Timer Manual: A Comprehensive

"OFF" during specific blocks (00:00–03:00, 08:00–15:00, 20:00–24:00) and peak hours. Operational Instructions  Press the P (or Program ) button

• I (Constant): Always On.
• O (Constant): Always Off.
• Clock/Timer Symbol: Runs the timer program.

If you have just purchased the new KES model or are struggling to understand an existing unit, this long-form manual will walk you through everything: from installation prerequisites, programming steps, troubleshooting, to advanced energy-saving tips.