Mjsxj10cm Firmware ((top)) -

Managing the firmware for your Xiaomi Mi 360° Home Security Camera (MJSXJ10CM)

Setup: Copy the file to the root directory of the SD card (don't put it in a folder). Flashing: Power off the camera. Insert the SD card into the slot (located under the lens). Power the camera back on. mjsxj10cm firmware

What is MSXJ10CM Firmware?

  • Manual flashing or opening device may void warranty.
  • Using modified firmware might violate terms of service.

Sometimes an update clears the network cache. Delete the camera from the Mi Home app, press the physical Reset button on the camera until you hear the voice prompt, and re-pair it as a new device. Manual Firmware Flashing (For Advanced Users) Managing the firmware for your Xiaomi Mi 360°

Check for Updates: Tap Firmware Update. If a new version is available, you can download and install it manually. Manual flashing or opening device may void warranty

  • Rename the file (if necessary) to tf_recovery.img. Copy it to the root directory of the microSD card (not inside any folder).
  • Power off the MJSXJ10CM camera.
  • Insert the microSD card into the camera’s slot.
  • Hold the reset button (usually a pinhole near the base) using a paperclip.
  • While holding reset, power on the camera. Keep holding for about 10-15 seconds.
  • The LED indicator will start blinking yellow and blue rapidly, then change to solid yellow while flashing.
  • Wait 3-5 minutes. Do not interrupt power. The camera will automatically reboot and speak a Chinese or English confirmation.
  • Remove the microSD card and re-add the camera in Mi Home.