Motorola Gm360 Programming Software -

, and GM380 mobile radios. It is primarily a legacy Windows-based application. motorola gm360 programming software

Reading the Radio (Get Current Settings)

1. Click Read or press F3.
2. A dialog will appear: “Turn radio on…”. Power cycle the GM360 (turn off, wait 2 seconds, turn on).
3. The CPS will read the radio’s codeplug (configuration file). This can take 10–20 seconds.
4. Once complete, you’ll see a tree view of all settings: General Settings, Conventional Personalities, Scan Lists, Buttons, etc.

Button Mapping: Customize the P1–P4 buttons for shortcuts like "Monitor," "Scan," or "High/Low Power." Mastering Your Motorola GM360 : A Guide to

Customer Programming Software (CPS): The GM360 belongs to the Motorola Professional Series (Waris). You will need the Professional Series CPS (e.g., version R03.11.15 or similar). Click Read or press F3

: The technician modifies the data within the CPS interface. Writing to Radio

• Genuine Motorola Cable (RKN4105A): Costs a fortune ($100+) but is bulletproof.
• Aftermarket USB Cable (eBay/Amazon – ~$20): These usually use a Prolific PL2303 or FTDI chip.