Pacific Fitness Del Mar Home Gym Assembly Manual |verified|

Assembling a Pacific Fitness Del Mar (often branded under ) home gym requires a logical sequence of frame construction followed by precise cable routing. Because these units are heavy and use high-tension cables, following safety protocols—like leaving bolts hand-tight until the frame is squared—is critical. 🛠️ Required Tools & Supplies

Attach the top bar to the two main posts using pre-threaded holes and Allen wrench bolts to pull the poles into the correct alignment. Weight Stack Installation pacific fitness del mar home gym assembly manual

• Tip: Do not fully tighten the frame bolts until the entire unit is assembled and squared. The manual usually advises leaving bolts slightly loose to allow for alignment adjustments before the final torque-down. Use thread-locking compound (Loctite) on frame bolts, as these machines vibrate significantly over time.

Step 9: Cable Routing
Critical step – incorrect routing causes malfunction or injury. Typical path for Pacific Fitness Del Mar: Assembling a Pacific Fitness Del Mar (often branded

Feed the cable (part #40485-101 for Del Mar) starting from the leg extension arm, passing over the retainer bolts and under the pulleys. Pulley Alignment: Tip: Do not fully tighten the frame bolts

Slide the weight cushions and spacers onto the rods first. Then, slide each weight plate down one by one, ensuring the pin holes face forward Selector Stem: Insert the selector stem through the center of the stack. 3. Top Beam & Attachments

Pacific Fitness Del Mar Home Gym Assembly Manual

Route the cable through the floating pulley bracket at the rear corner of the unit. National Gym Supply 5. Finishing Touches Arms & Paddings: