Rc522 Proteus Library Access

The RC522 RFID module, based on the NXP MFRC522 controller, is a staple in identification projects, operating at 13.56 MHz. It typically uses SPI for communication and works with passive tags like Mifare Classic 1K.

Once the module is placed in your schematic, you must connect it to a microcontroller (e.g., Arduino Uno) to simulate actual communication. Arduino RFID RC522 Quick Start Guide Tutorial - HW Kitchen rc522 proteus library

Pro Tip: To simulate "removing" the card, pause the simulation, change the UID field to 00 00 00 00 or uncheck a "Card Present" box, then resume. The RC522 RFID module, based on the NXP

| RC522 Pin | Proteus net label / connected to | |-----------|----------------------------------| | SDA (SS) | Arduino Digital 10 | | SCK | Arduino Digital 13 | | MOSI | Arduino Digital 11 | | MISO | Arduino Digital 12 | | IRQ | (optional) – leave unconnected | | GND | Ground | | RST | Arduino Digital 9 | | 3.3V | VCC (3.3V terminal in Proteus) | Arduino RFID RC522 Quick Start Guide Tutorial -

The MFRC522 is a highly integrated reader/writer for contactless communication at 13.56 MHz. It is widely used for security systems, asset tracking, and smart locks. Utilizing a simulation library allows you to: