The Technicolor TG788Avn Go to product viewer dialog for this item.
Flashing the -TG788Avn Firmware- is not like updating a smartphone OTA. It is invasive. You will erase everything. Prepare the following: -TG788Avn Firmware-
: Supports the latest internet protocol standard for future-proofing. Voice over IP (VoIP) : Includes 2 FXS ports The Technicolor TG788Avn Go to product viewer dialog
| Error Code | Message | Likely Cause | Solution |
| :--- | :--- | :--- | :--- |
| 0x10105002 | Romcode/Initialize DDR/Read initialize status | Wrong DDR timing in firmware | Find a firmware built for your specific RAM brand (Hynix vs Samsung) |
| 0x10301004 | Romcode/Switch status/Identify/USB error | Bad USB cable or port | Use USB 2.0 port, not USB 3.0. Shorten cable length (< 1.5m) |
| 0x30405003 | Uboot/Get result/Disk error | NAND corruption | Erase NAND via shorting pins 29-30 of the NAND chip during power-on |
| No connection | [HUB] No device found | Driver not installed | Reinstall WorldCup_Device.inf in Device Manager (Legacy hardware) | 4PDA Forum (Russian) – Search for "TG788Avn firmware"
: Automatically detects the Ethernet port where a set-top box is connected to prioritize video traffic. CLI Access
: 802.11b/g/n on the 2.4 GHz band (up to 300 Mbps) with 2x2 antenna configuration. : 4 Fast Ethernet ports for connecting local devices. IPv6 Ready
In Borderlands 4, Firmware is a "twinkling" rare roll found on non-weapon gear (Shields, Class Mods, Enhancements, Repkits, and Ordnance). How to "Make" a Firmware Piece (Transfer)