Here’s a short draft text describing "ThumbsPlus WebP" (assumes a feature or plugin that adds WebP support to ThumbsPlus):
Adobe products have supported WebP since 2022. thumbsplus webp
WebP Advantages: Integrating WebP into your workflow allows you to maintain high-quality imagery with file sizes that are often 25-34% smaller than JPEGs, which is a primary reason for the format's popularity among webmasters using Google for Developers resources. Here’s a short draft text describing "ThumbsPlus WebP"
The Digital Archivist’s Dilemma: ThumbsPlus and the WebP Revolution Open ThumbsPlus
ThumbsPlus WebP — Fast, native WebP support for ThumbsPlus
.webp files.Ctrl + Shift + F5 (Force Refresh Thumbnails).View > Options > File Types and ensure .webp is checked.This gap is particularly frustrating because WebP is now natively supported by almost 96% of modern web browsers. It has become the standard for web performance, offering lossy and lossless compression that outperforms traditional formats. Why Support is Slow to Arrive
Honestly? If you handle thousands of WebP files, forcing ThumbsPlus to support them is like teaching a diesel engine to run on gasoline. Instead, create a hybrid workflow using ThumbsPlus for management and external tools for conversion.
[ 35HD-NAS-E ] MRT GigaNAS 35HD-NAS-E 3.5" SATA Single Bay NAS (gemini) ================== !!! IMPORTANT NOTICE !!! ================== This firmware image is compatible with factory bootloader only ============================================================== Product specification: Vendor: MRT Communication Ltd. CPU/SoC: Cortina Systems/Storlink devices CS3516/SL3516 (FA526) @ 300MHz (ARM) Memory: 64 MiB (DDR1 SDRAM) Flash size: 16 MiB (Parallel NOR): 3 MiB for kernel and 6+6 MiB for rootfs (1 MiB misc: boot, VCTL, FIS, config) Bootloader: Storlink Boot Loader (zImage) Ethernet ports: 1 x 1000 Mbps (PHY: Marvell 88E1111) Wireless: None MiniPCI slots: None USB ports: 1 x USB 2.0 (back side) Input voltage: 12V DC / 2A via Philmore 258 Barrel Plug, Type: Adaptaplug N (Polarity: Center positive wiring) RTC battery: CR2032 / 3V lithium battery UART settings: 19200 baud, 8-N-1 mode (TTL compatible logic levels) UART pinout: JP4 / Vcc (3.3V): 1, RX: 2, TX: 3, GND: 5. Device alias: Multicase HD-35SN ============================================================== NOTICE: This image works with the official package repository. ============================================================== Files: - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-zImage.img LZMA kernel (parition: Kern), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-bootlog.txt device bootlog (dmesg), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-squashfs.img squashfs filesystem (parition: Ramdisk), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-sysupgrade.tar.gz sysupgrade image, - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-packages.txt packages list (opkg list-installed), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e.md5 MD5 checksum. ========= CHANGELOG ========= Chaos Calmer 15.05.1 (r48532) - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e* - 2018-03-14 ------------------------------------------------------------------------------------------- [UPD] Updated to Openwrt Chaos Calmer v15.05.1 (r48532), [NEW] Darkmatter theme for LuCI added. Chaos Calmer 15.05 (r46767) - openwrt-gemini-mrt-35hd-patafix+jp3-led* - 2016-07-30 ----------------------------------------------------------------------------------- [FIX] Memory size modified to 64MB, [MOD] The device has no Machine ID so it uses ID of Raidsonic NAS4210-B: 0x1fff (8191), [NEW] JP3 (GPIO #14) unsoldered LED pin support added (mrt35hd:jp3:hdd -> idedisk), [FIX] Default trigger changed for JP3 pin: idedisk (kernel based), [FIX] ATA Channel #1 disabled, [NEW] Kernel modules compiled into the kernel: leds-gpio, ledtrig-ide-disk. [FIX] Sysugrade and ramdisk image published and firmware size fixed (hddapp removed), [NEW] Necessary kernel modules and packages added to rootfs image. [ FIRMWARE SUMMARY ] Kernel version: 3.18.23 Image format: zImage (LZMA) Rootfs Type: SquashFS Build server: itsuki.dev.dtech.hu Build host: Debian GNU/Linux, Version 7.0 Latest build: 2018-03-14 Status: PRODUCTION TEST RESULT: OK