VCutWork Install — Complete Guide

What is VCutWork?

VCutWork is a video editing plugin/tool (assumed: a cut/trim assistant and batch cutter) that speeds up editing by automating scene detection, creating multicam cuts, and exporting trimmed clips. This guide assumes you want a clear, step-by-step installation and quick-start tutorial for typical desktop environments (Windows and macOS) and common host editors (Adobe Premiere Pro and DaVinci Resolve). If your target differs (Linux, a specific NLE, or a different VCutWork product), the steps are still a useful template.

Step 2: Set the COM Port

1. Click Settings or Config (gear icon).
2. Go to Communication or Port Settings.
3. Port: Select the COM number from Device Manager (e.g., COM3).
4. Baud Rate: Set to 115200 (or 250000 for newer lasers). Check your laser manual.
5. Click Open Serial or Connect.

VCutWorks (often associated with Ruida Technology controllers) is a specialized CNC software designed primarily for oscillating knife cutting machines. Whether you are cutting foam, cloth, or leather, a proper installation is the foundation for precise digital cutting.

• Sensitivity: Low/Medium/High (higher = more cuts).
• Scene length threshold: ignore cuts shorter than X frames.
• Audio threshold: enable to detect silent gaps.

Driver Installation:Depending on your operating system and hardware, you may need specific drivers to allow your PC to communicate with the machine: