Skip to main content

Installing the wwsuite.lic license file for Wonderware InTouch 10.1

4. Common Issues & Troubleshooting

| Issue | Likely Cause | Solution | |-------|--------------|----------| | “No license found” | Wrong file path | Move .lic to ...\ArchestrA\License | | “License expired” | Demo mode active | Replace with permanent .lic file | | “HostID mismatch” | Node-locked to different hardware | Re-host license or re-generate file | | Dongle not detected | Missing Sentinel driver | Install Sentinel Protection Installer 7.6.1 |

Title: Navigating the Legacy: Installing Wonderware InTouch 10.1 with WWSuite Licensing

ArchestrA License Manager: This utility is installed by default with InTouch 10.1. Step-by-Step Installation Guide 1. Launch the License Manager Navigate to the Windows Start menu. Go to Programs > Wonderware > Common.

Step 2: Installing the License File (Soft Key)

If you received a license file (usually named WWSuite.lic or [SerialNumber].lic) via email or a download link:

Step-by-Step License File Installation

  1. Copy the file: Take your valid WWSuite.lic file (received via email or downloaded from the Wonderware Licensing Portal).
  2. Navigate to the License folder using the path above. If the ArchestrA or License folder does not exist, create it manually.
  3. Paste the file into the License folder.
  4. Rename if necessary: The License Manager looks for WWSuite.lic by default. If your file is named License.lic or Suite.lic, rename it to WWSuite.lic .
  5. Verify file properties: Right-click WWSuite.lic > Properties.

    To ensure a successful installation, verify the following:

    To use the WWSuite components, you need to activate them:

    Additional Resources

1 Wwsuite Lic Install [new]: Wonderware Intouch 10

Installing the wwsuite.lic license file for Wonderware InTouch 10.1

4. Common Issues & Troubleshooting

| Issue | Likely Cause | Solution | |-------|--------------|----------| | “No license found” | Wrong file path | Move .lic to ...\ArchestrA\License | | “License expired” | Demo mode active | Replace with permanent .lic file | | “HostID mismatch” | Node-locked to different hardware | Re-host license or re-generate file | | Dongle not detected | Missing Sentinel driver | Install Sentinel Protection Installer 7.6.1 |

Title: Navigating the Legacy: Installing Wonderware InTouch 10.1 with WWSuite Licensing wonderware intouch 10 1 wwsuite lic install

ArchestrA License Manager: This utility is installed by default with InTouch 10.1. Step-by-Step Installation Guide 1. Launch the License Manager Navigate to the Windows Start menu. Go to Programs > Wonderware > Common.

Step 2: Installing the License File (Soft Key)

If you received a license file (usually named WWSuite.lic or [SerialNumber].lic) via email or a download link: Installing the wwsuite

Step-by-Step License File Installation

  1. Copy the file: Take your valid WWSuite.lic file (received via email or downloaded from the Wonderware Licensing Portal).
  2. Navigate to the License folder using the path above. If the ArchestrA or License folder does not exist, create it manually.
  3. Paste the file into the License folder.
  4. Rename if necessary: The License Manager looks for WWSuite.lic by default. If your file is named License.lic or Suite.lic, rename it to WWSuite.lic .
  5. Verify file properties: Right-click WWSuite.lic > Properties.

    To ensure a successful installation, verify the following:

    To use the WWSuite components, you need to activate them: Copy the file: Take your valid WWSuite

    Additional Resources