The XY-CD60 is a dual-function battery controller module designed for DC 6V–60V systems. It acts as an automated switch to protect lead-acid or lithium batteries from overcharging and over-discharging by managing the connection between a power source (charger), the battery, and the load. Core Specifications Voltage Range: DC 6V to 60V.

Charging Time Control (OP): You can set a specific duration for charging. If the voltage does not reach the upper limit within this time, the relay will automatically disconnect.

What You Need:

• A gauge block (1", 2", or 25mm, 50mm) – or a known-good reference object.
• Clean cloth.

Top tips from the manual (practical takeaways)

1. Inserting a CD: Open the CD tray, gently place the CD on the tray with the label side facing up, and close the tray.
2. Playing a CD: Press the Play/Pause button to start playback. The CD player will read the CD and start playing from the first track.
3. Pausing Playback: Press the Play/Pause button to pause playback. Press again to resume playback.
4. Stopping Playback: Press the Stop button to stop playback.
5. Skipping Tracks: Use the Track Up/Down buttons to skip to the next or previous track.

• Warning: If connecting a large heater, induction motor, or compressor exceeding 10A, you must use an external Solid State Relay (SSR) or a contactor. Connecting high-current devices directly to the XYCD-60 will burn out the relay and potentially cause a fire.